Hunting Spotlights: Reflector Size, Filters and Spotlighting Safely in NSW
For spotlighting foxes, rabbits and feral cats on private land, a handheld 170 mm spotlight is the best all-rounder: enough reach for a paddock, light enough to hold for an hour. Step up to a 240 mm light or a roof-mounted remote spotlight for big open country, and fit a red or amber filter for foxes, which tend to react less to it. Always identify the whole animal and what's behind it before you shoot; eyeshine alone is not a target.
Spotlighting is still one of the most effective ways to control foxes, rabbits and feral cats, and a good light costs a fraction of a thermal. This guide covers reflector size, halogen, HID and LED, filters, handheld versus roof-mounted, power, and how to spotlight safely and legally in NSW.
Reflector size: 140, 170 or 240 mm
| Reflector | Best for | Trade-off |
|---|---|---|
| 140 mm | Small blocks, rabbits, close work | Compact and light; less reach |
| 170 mm | Foxes and cats on typical farmland | The all-rounder; comfortable to hold for long sessions |
| 240 mm | Open country, long paddocks | Long reach and a tight beam; heavier and draws more power |
A bigger reflector throws light further and tighter. For walking or working from a ute on an ordinary farm, a 170 mm light such as the Lightforce 170 Striker is the size most shooters settle on. For long, open paddocks, the 240 Blitz carries further. Both are in the Lightforce handheld range, with an alligator clip or a curly cord.
Halogen, HID or LED?
- Halogen. The traditional spotlight globe: warm light, simple, inexpensive and easy to replace in the field. It draws more power for the light it gives.
- HID (high-intensity discharge). Much brighter and whiter, with longer reach for the same reflector. It takes a moment to reach full brightness and costs more. The Powa Beam 7in HID and Powa Beam 9in HID are examples.
- LED. Instant on, efficient and tough, and ideal for compact rechargeable lights. Good for checking stock, walking and short-range work.
Brighter isn't always better. A very bright white beam at close range can spook animals and dazzle you off reflective grass. Many experienced shooters use a dimmer beam or keep the bright light for confirming targets at distance.
Filters: red, amber or clear
Filters clip over the lens and change the colour of the beam.
- Red. The common choice for foxes. Many shooters find foxes react less to red light, especially on properties that have been spotlighted before. Red cuts the range noticeably.
- Amber. A middle ground: more range than red, softer than white, and helpful in dust and light fog.
- Clear. Full range and the best colour for identifying a target.
A practical approach is to scan with a red or amber filter, then confirm the animal with a clear beam before you shoot. Filters are made for each reflector size, so match the filter to your light; ask us at the counter.
Handheld or roof-mounted remote?
- Handheld. Flexible, portable and inexpensive. The shooter's partner holds the light from the vehicle or on foot. It works well for two-person teams.
- Roof-mounted remote. A light fixed through or onto the cab roof, steered by a handle from inside. Steadier, easier for one person, and the beam stays put while the rifle is up. The Lightforce remote-mount spotlights in 170 and 240 mm are designed for permanent installation through the cab roof, and the Pro-Tactical Max-Lume 240 mm remote spotlight mounts on the roof or bonnet or works with a remote handle.
- Rifle- or scope-mounted. Lights mounted on the rifle move wherever the muzzle points, which means you sweep the muzzle across everything you light. We recommend scanning with a separate light and only bringing the rifle up once the target is identified.
Power
Most spotlights run from a vehicle's 12 V socket or a portable battery. Check that the socket, plug and wiring are rated for the light's draw: a 100 W halogen pulls a lot of current, and cheap sockets overheat. For walking work, a lithium battery pack in a shoulder bag keeps the weight off your hands. Carry a spare globe for halogen lights; they are small and inexpensive to keep in the glovebox.
Spotlight or thermal?
A thermal scanner finds warm animals that a spotlight would miss, through grass and without alerting them. A spotlight is still the better tool for confirming exactly what an animal is, judging what lies beyond it, and for anyone on a budget. Many shooters now scan with a thermal and confirm with a light. The Powa Beam 7in spotlight with thermal bracket is built for that combination. See our guide to thermal for pest control.
Spotlighting safely
- Identify the whole animal. Eyeshine alone is not a target. Stock, dogs, kangaroos and people all reflect light. Confirm species, size and shape with a clear beam before the rifle comes up.
- Know what's beyond it. At night you can't see the backstop as well as in daylight. Only shoot where you know the ground behind the animal is safe, and never towards houses, roads, sheds, stock or the skyline.
- Learn the property by day. Walk or drive it in daylight first. Note dams, gullies, sheds, tracks, fences, houses and where stock are kept.
- Agree the plan. Shooter and light-holder agree who calls the shot, where the safe arcs are, and that the shooter never fires unless the target is fully lit and confirmed.
- Muzzle discipline in and around the vehicle. Rifles unloaded while driving between spots, actions open when getting in and out.
Spotlighting legally in NSW
Spotlighting foxes, rabbits and feral cats is normally done on private land, with the landholder's permission and with a firearms licence that covers the rifle you're using. Make sure the landholder knows when and where you'll be shooting. Deer must not be hunted at night on NSW public land, and any public-land hunting is subject to the conditions of your written permission from NSW DPIRD. Our guides to who can shoot feral animals on whose land and deer hunting rules cover the detail. If you're unsure whether a particular method or place is allowed, check with NSW DPIRD or NSW Police before you go.
Pairing a light with the right rifle
For foxes and cats by spotlight, a .223 or .22 WMR at sensible ranges is typical; for rabbits, a .22 LR or .17 HMR. Our fox control guide covers calling foxes into the light, and feral cat night rigs covers cat setups. A trail camera shows you where and when animals are moving before you head out.
Magnum Sports, NSW Firearms Dealer Licence 413159984, stocks Lightforce, Powa Beam and Pro-Tactical spotlights, remote mounts and filters at our Roseville Chase store. Browse all spotlights, or call (02) 9882 2689.
Frequently asked questions
What size spotlight is best for foxes?
A 170 mm handheld is the all-rounder for typical farmland. Choose 240 mm for long, open paddocks.
What colour filter is best for spotlighting foxes?
Red is the most common choice because foxes tend to react less to it. Confirm the target with a clear beam before you shoot.
Is HID better than halogen?
HID is brighter and reaches further for the same reflector size, but costs more and takes a moment to warm up. Halogen is simple and inexpensive.
Spotlight or thermal for pest control?
A thermal finds animals; a spotlight confirms them. Many shooters use both: scan with a thermal and confirm with a light.
Can I spotlight on public land in NSW?
Deer must not be hunted at night on NSW public land, and any public-land hunting is subject to your DPIRD permission conditions. Spotlighting is normally done on private land with the landholder's permission.
Should I mount a light on my rifle?
We recommend scanning with a separate light, so you don't sweep the muzzle across everything you light, and bringing the rifle up only once the target is identified.
General information, not legal advice. Confirm current rules with NSW DPIRD or NSW Police. Last checked 17 November 2026.
