Trail Cameras for Hunting and Pest Control: How to Choose One and Where to Mount It

The best trail camera for Australian hunting and pest control is one that triggers fast (0.5 seconds or quicker), uses a no-glow 940 nm infrared flash so pigs, foxes and people don't see it at night, and is powered for the heat. Choose an SD-card camera if you visit the site every week or two, and a 4G cellular camera if the site is a long drive away or you're watching a pig trap. Mount it at knee height, facing south, 3 to 5 metres from the trail.

A trail camera tells you what is using a property, when, and how often, without you walking in and leaving scent every day. For pig trapping, fox control before lambing, or working out where the fallow are moving on a block you have permission to hunt, it saves days of guesswork. This guide covers the specifications that matter, the ones that don't, and how to set a camera so it actually catches the animal.

What a trail camera is for

  • Pig trapping and baiting. See when the mob arrives, how many there are and whether they're all going into the trap before you set the gate. Our guide to feral pig control covers where trapping, baiting and shooting each fit.
  • Fox and cat activity. Find the dens, fence crossings and the time of night they move, so your calling and spotlighting sessions start in the right place. See fox control and feral cat setups.
  • Deer patterns. On private land where you have permission, cameras on pads, wallows and water show which animals are there and when they move.

The specifications that matter

Trigger speed

Trigger speed is the delay between the sensor detecting movement and the camera taking the picture. A fox trotting along a fence line can cross the frame in under a second, so slow cameras give you a picture of an empty track or a tail. Look for 0.5 seconds or faster. The Hikmicro T16 and Ridgetek RL 4K are rated at 0.4 seconds and the Wildgame Innovations Mirage at 0.5. Budget cameras such as the Wildgame Kicker (under 1 second) are fine on a feeder or a trap where animals stand still.

Detection range and the summer problem

Trail cameras use a passive infrared (PIR) sensor, which detects a warm body moving against a cooler background. Rated detection ranges of 20 to 25 metres are typical: 25 m for the Hikmicro T16 and 20 m for the Ridgetek. What the box doesn't tell you is that on a hot Australian afternoon, when the ground and air are close to an animal's body temperature, the sensor has less contrast to work with and real detection range shrinks. In summer, set cameras closer to where animals will pass, and expect the best results at night and early morning.

No glow or low glow

At night the camera lights the scene with infrared LEDs.

  • No glow (940 nm). Invisible to animals and people. Night range is usually a little shorter, but nothing sees the camera fire. This is our pick for pigs and foxes, which are camera-shy once they've been pressured, and for any site where theft is a worry. The Hikmicro T16, the Bushnell CORE DS-4K, the Bushnell CORE S-4K and the Wildgame Mirage Lightsout Blackout are no-glow.
  • Low glow (850 nm). A faint red glow is visible on the LEDs when the camera fires, usually with brighter, longer-range night images. Fine on deer pads and quiet private blocks. The Ridgetek RL 4K and Bushnell Prime L20 are low-glow.

Megapixels: read the small print

The big number on the box is often not the sensor. Many trail cameras use a 4 to 6 MP sensor and enlarge the file in software to 20 MP or more. The Ridgetek RL 4K, for example, uses a 4 MP sensor with selectable output up to 24 MP, and the Hikmicro T16 a 6 MP sensor with stills up to 24 MP. Enlarged files are bigger, not sharper. Image quality at night depends far more on the sensor, the lens and the infrared flash. The Bushnell CORE DS-4K takes a different approach, with two sensors, one optimised for day and one for night.

SD card or 4G cellular?

An SD-card camera stores everything on the card, and you walk in to collect it. It costs nothing to run, but every visit leaves scent and disturbs the site. A cellular camera sends images to your phone as they happen.

  • Choose SD for sites you visit every week or two anyway, and for blocks with no mobile coverage.
  • Choose 4G for pig traps (you know the moment the mob is in), sites that are hours away, and anywhere you want to keep human scent out. The Hikmicro T16 has an embedded SIM and sends photos and video to the HIKMICRO Sight app, with 64 GB of internal storage instead of an SD card.

A cellular camera only works where there is mobile coverage at the camera itself, not just at the homestead. Check signal on your phone at the exact spot before you buy, and ask us about the current data plan details for the model you choose.

Power for Australian conditions

  • Use lithium AA cells in AA cameras. They cope with heat and cold far better than alkaline cells and last much longer in the field.
  • Check the battery count. The Ridgetek runs on 8 AA cells for up to about 8 months on standby, and the Bushnell Prime L20 on 6 AA cells for up to a year on standby with alkalines. Video, night triggers and cellular uploads all shorten those figures a lot.
  • Go external for long deployments. The Hikmicro T16 takes rechargeable 18650 cells, 12 AA cells, a 12 V supply or a solar panel. For Bushnell CORE DS-4K cameras, the HME 12 V solar auxiliary power pack extends time between visits (note it comes with a US-style plug for charging).
  • Heat ratings. Look for an operating range that reaches at least 55 °C. The Hikmicro T16 is rated to 55 °C and the Ridgetek to 60 °C. A camera on a western-facing post in January sees far more than the air temperature.

How to set a trail camera so it works

  1. Face it south. In Australia the sun tracks across the northern sky. A camera facing north or straight into the rising or setting sun gets glare, washed-out images and false triggers.
  2. Mount at knee height for pigs and foxes, about 60 to 90 cm off the ground, angled slightly down. Mount higher, about chest height, for deer.
  3. Set it 3 to 5 metres from where the animal will pass, and at an angle to the trail rather than square to it, so the animal stays in frame longer.
  4. Clear the foreground. Grass, branches and leaves moving in the sun cause most false triggers and flat batteries. Trim what's in front of the lens.
  5. Test before you leave. Walk past it on all fours at the distance you expect the animal, then check the image on the camera's screen or your phone.
  6. Format the card in the camera each time you swap it, and check the camera's card size limit. The Mirage and Prime L20 take cards up to 32 GB; the Ridgetek takes up to 128 GB.

Theft, permission and privacy

  • Lock it up. The Bushnell trail camera security box fits Bushnell CORE SD, CORE S-4K and Prime series cameras and takes a cable lock. A no-glow flash and a camo housing do half the job by keeping it unseen.
  • Get permission. Only set cameras on land where you have the landholder's permission, and on public land follow the conditions of any written permission you hold. Our guide to who can shoot on whose land covers permission in more detail.
  • Point it at animals, not people. Recording people raises privacy and surveillance-law questions in NSW. Aim cameras at game trails, water and traps, not at neighbours' houses, roads or public walking tracks, and don't post images of people you've caught.

Which trail camera should you buy?

Browse all trail cameras. Stock moves quickly in the lead-up to Christmas, so check the listing or ring us. A trail camera is also one of the few presents a hunter or farmer will use every week. Once your camera has shown you where the animals are, a thermal spotter is the natural next step for night work.

Magnum Sports, NSW Firearms Dealer Licence 413159984, stocks trail cameras from Bushnell, Hikmicro, Wildgame Innovations and Ridgetek at our Roseville Chase store, and we can talk you through which one suits your property. Call (02) 9882 2689 or come in.

Frequently asked questions

What is the difference between no glow and low glow trail cameras?

No-glow cameras use 940 nm infrared, which animals and people can't see. Low-glow cameras use 850 nm infrared, which shows a faint red glow when the camera fires but usually gives brighter, longer-range night images. For pigs, foxes and theft-prone sites, choose no glow.

Do cellular trail cameras work in Australia?

Yes, where there is 4G coverage at the camera site. Check signal on your phone at the exact spot before you buy. Without coverage, an SD-card camera is the better choice.

How high should I mount a trail camera for pigs?

About knee height, 60 to 90 cm, angled slightly down and 3 to 5 metres from where the pigs will pass. Face it south to avoid sun glare.

Why does my trail camera take pictures of nothing?

Usually moving grass or branches in front of the lens, or sun on the sensor. Clear the foreground, face the camera south, and lower the sensitivity on hot, windy days.

Is more megapixels better on a trail camera?

Not always. Many cameras enlarge a 4 to 6 MP sensor's image in software. Night performance depends more on the sensor, lens and infrared flash than on the megapixel figure.

Do I need permission to put a trail camera on someone else's land?

Yes. Only set cameras where the landholder has given permission, and aim them at animal trails, not at people, houses or roads.

General information. Specifications are taken from the manufacturers' published figures and real-world performance varies with conditions. Last checked 16 November 2026.