Incl. GST·Free standard post on orders over $700
- In store:
- In stock at supplier, allow 5+ days
- Special order, allow 5+ days
- Out of stock at supplier, enquire with store
Available now instead
The Redding Competition Neck Die 270 WSM is out of stock at every supplier we deal with. These are in stock or available to order now.
- Licensed NSW firearms dealer 413159984
- Returns & warranty
- Ask an expert (02) 9882 2689
The Redding Competition Bushing Neck Die (part no. 56255) neck-sizes fired 270 WSM cases for precision and benchrest-style handloading. An internal sliding sleeve holds the case in line with a self-centring sizing bushing before sizing begins, to keep neck runout to a minimum.
A micrometer head sets how much of the neck is sized, moving the bushing 1.27 mm (0.050 in) per turn. Interchangeable bushings in 0.001 in steps set neck tension. The die screws into standard 7/8"-14 presses and uses shellholder #6. Bushings are sold separately.
Fits
- 270 Winchester Short Magnum cases
Check the part number against your firearm's parts diagram before ordering.
At a Glance
| 270 WSMCalibre | Neck onlySizing type | 7/8"-14Thread |
| 1.27 mm (0.050 in)Micrometer travel per turn | 0.001 inBushing size steps | #6Redding shellholder |
Key Features
- Straighter necks – a sliding sleeve supports the case and aligns it with the bushing before sizing starts, minimising neck runout.
- Bushing centres itself – the sizing bushing floats to centre on the case neck rather than forcing the neck off-axis.
- Size full or partial necks – the micrometer head positions the bushing precisely, so you can size the whole neck or only a half or third of it.
- Clean, aligned decapping – the die's internal parts guide the adjustable decapping rod in line, much like a firing pin.
- Neck tension your way – interchangeable bushings in 0.001 in increments, in heat-treated steel or titanium nitride coated, are available separately.
- Carbide button upgrade – an optional Redding carbide size button kit (part no. 99327) adds control of neck inside diameter.
Specifications
| Brand | Redding |
| Part number | 56255 |
| Product | Competition Bushing Neck Die |
| Calibre | 270 Winchester Short Magnum |
| Sizing type | Neck sizing, interchangeable bushing |
| Thread | 7/8"-14 |
| Micrometer adjustment | 1.27 mm (0.050 in) per turn |
| Compatible bushings | 0.185–0.368 in, in 0.001 in increments; 1/2 in OD x 3/8 in long (sold separately) |
| Shellholder | Redding #6 (sold separately) |
| Optional carbide size button kit | 99327 |
In the Box
- Competition Bushing Neck Die with micrometer head and decapping rod
- 7/8"-14 lock ring
Neck-sizing bushing not included.
