No reviews
Regular price
$299.00
Sale price$259.00
Save $40.00
/
Tax included.
Shipping calculated at checkout.
Incl. GST·Free standard post on orders over $700
- In store:
- In stock at supplier, ships in about 2 business days
- Special order, allow 5+ days
- Out of stock at supplier, enquire with store
Hornady Full Length Die Set 6mm/284
$259.00
- Licensed NSW firearms dealer 413159984
- Returns & warranty
- Ask an expert (02) 9882 2689
A Hornady Custom Grade two-die set for reloading 6mm-284: a full-length sizing die and a bullet seating die. It suits hunters and target shooters loading jacketed bullets of 6.17 mm (.243") diameter.
This calibre sits in Hornady's Series IV range (low-volume, near semi-custom bottleneck rifle cartridges). It takes shell holder #1 (No. 390541), which is a separate item.
Fits
- 6mm-284
Check the part number against your firearm's parts diagram before ordering.
At a Glance
| 6mm-284Calibre | 6.17 mm (.243")Bullet diameter | 2Dies in set |
| Series IVHornady die series | #1Shell holder |
Key Features
- Zip Spindle – the sizing die spindle locks without slipping and can be fine-tuned by turning or zipped up and down for big moves.
- Elliptical expander – sizes necks smoothly with less friction and neck stretch than a ball expander, and is threaded so it cannot pull loose.
- In-line bullet seating – a floating alignment sleeve and steel seating stem line up bullet and case neck before seating, for straighter rounds.
- Built-in crimper – roll-crimp in the seating die without giving up a press station to a separate crimp die.
- Sure-Loc lock rings – the ring clamps right around the die and its screw never touches the threads, so settings hold without plier damage.
- Polished internals – a smooth machined die profile helps stop cases sticking; Hornady says the dies will not break or wear out in normal use.
Specifications
| Brand | Hornady |
| Part number | 546250 |
| Product line | Custom Grade (New Dimension) 2-die set |
| Calibre | 6mm-284 (Hornady catalogue: 6MM-284) |
| Bullet diameter | 6.17 mm (.243") |
| Die series | Series IV |
| Dies included | Full-length sizing die, bullet seating die |
| Shell holder | #1 (No. 390541), not included |
In the Box
- Full-length sizing die with Zip Spindle and elliptical expander
- Bullet seating die with in-line seating system
- Sure-Loc lock rings
