No reviews
Regular price$519.00
/
Tax included.
Shipping calculated at checkout.
PayPal is not available for this item. Pay by card or bank transfer at checkout.
Incl. GST·Shipping calculated at checkout
- In store:
- In stock at supplier, allow 5+ days
- Special order, allow 5+ days
- Out of stock at supplier, enquire with store
Available now instead
The RCBS Bullet Mould 30-180-FN is out of stock at every supplier we deal with. These are in stock or available to order now.
RCBS Bullet Mould 30-180-FN
$519.00
- Licensed NSW firearms dealer 413159984
- Returns & warranty
- Ask an expert (02) 9882 2689
The RCBS .30-180-FN 546 is a double-cavity cast-iron bullet mould that casts .30-calibre, 180-grain flat nose bullets. It is for handloaders who cast their own projectiles for plinking, hunting or target shooting.
Mould handles are not included and are sold separately. The 3-digit number in the designation, 546, is the matching RCBS Lube-A-Matic top punch. Stated weights are RCBS nominal figures for its recommended alloy; actual weight and diameter vary with the alloy used.
At a Glance
| .30Calibre | 180 grBullet weight | Flat noseBullet style |
| 2Cavities | 546Top punch no. |
Key Features
- Consistent castings – the blocks are machined from solid cast iron to close tolerances.
- Square, true blocks – each block is precision ground square before the cavities are machined.
- Halves that stay aligned – steel alignment pins keep the blocks mating accurately, even after heavy use.
- Clean sprue cuts – a 4.8 mm (3/16″) solid steel sprue plate is held by tempered steel spring washers and screws.
- Easy lubri-sizer matching – the 546 in the designation tells you which RCBS Lube-A-Matic top punch to use.
- Fits RCBS handles – interchangeable blocks lock onto RCBS mould handles with Allen-type set screws (handles sold separately).
Specifications
| Brand | RCBS |
| Part number | R82014 |
| Manufacturer part no. | 82014 |
| RCBS designation | .30-180-FN 546 |
| Calibre | .30 |
| Bullet weight | 180 gr (11.7 g) |
| Bullet style | Flat nose |
| Cavities | Double (2) |
| Lube-A-Matic top punch no. | 546 |
| Block material | Cast iron, heat blued |
| Sprue plate | Solid steel, 4.8 mm (3/16″) thick |
| Alignment | Hardened steel alignment pins |
| Handles | Not included – sold separately |
In the Box
- RCBS bullet mould blocks with sprue plate
- Mould handles not included
