No reviews
Regular price$519.00
/
Tax included.
Shipping calculated at checkout.
PayPal is not available for this item. Pay by card or bank transfer at checkout.
Incl. GST·Shipping calculated at checkout
- In store:
- In stock at supplier, Allow 2 weeks for delivery1
- Special order, allow 5+ days
- Out of stock at supplier, enquire with store
RCBS Bullet Mould 09-124-CN
$519.00
- Licensed NSW firearms dealer 413159984
- Returns & warranty
- Ask an expert (02) 9882 2689
The RCBS 9MM-124-CN 402 is a double-cavity cast-iron bullet mould that casts 9 mm-calibre, 124-grain CN (as designated by RCBS) bullets. It is for handloaders who cast their own projectiles for plinking, hunting or target shooting.
Mould handles are not included and are sold separately. The 3-digit number in the designation, 402, is the matching RCBS Lube-A-Matic top punch. Stated weights are RCBS nominal figures for its recommended alloy; actual weight and diameter vary with the alloy used.
At a Glance
| 9 mmCalibre | 124 grBullet weight | CN (as designated by RCBS)Bullet style |
| 2Cavities | 402Top punch no. |
Key Features
- Consistent castings – the blocks are machined from solid cast iron to close tolerances.
- Square, true blocks – each block is precision ground square before the cavities are machined.
- Halves that stay aligned – steel alignment pins keep the blocks mating accurately, even after heavy use.
- Clean sprue cuts – a 4.8 mm (3/16″) solid steel sprue plate is held by tempered steel spring washers and screws.
- Easy lubri-sizer matching – the 402 in the designation tells you which RCBS Lube-A-Matic top punch to use.
- Fits RCBS handles – interchangeable blocks lock onto RCBS mould handles with Allen-type set screws (handles sold separately).
Specifications
| Brand | RCBS |
| Part number | R82027 |
| Manufacturer part no. | 82027 |
| RCBS designation | 9MM-124-CN 402 |
| Calibre | 9 mm |
| Bullet weight | 124 gr (8.0 g) |
| Bullet style | CN (as designated by RCBS) |
| Cavities | Double (2) |
| Lube-A-Matic top punch no. | 402 |
| Block material | Cast iron, heat blued |
| Sprue plate | Solid steel, 4.8 mm (3/16″) thick |
| Alignment | Hardened steel alignment pins |
| Handles | Not included – sold separately |
In the Box
- RCBS bullet mould blocks with sprue plate
- Mould handles not included
